Revit Phases and Phase Filters Explained: Existing, Demolition and New Construction Views

Renovation projects are where many Revit users first meet phasing, and often where they first get confused. Walls vanish from a plan, demolished doors show up in the wrong view, or a room schedule suddenly reports nothing. The good news is that Revit phasing follows a small set of logical rules. Once you understand how phases, phase status and phase filters fit together, existing, demolition and new construction drawings almost produce themselves.

REVIT TIPS Revit Phases and Phase Filters Existing, demolition and new work made simple Explained EXISTING DEMOLISHED NEW

Phases: Time Periods in Your Model

In Revit, a phase is a distinct period in the life of a project. A new project normally starts with two phases, Existing and New Construction, and you can rename them or add more in the Phasing dialog. To open it, go to the Manage tab, Phasing panel, and click Phases. The order of the list matters: Revit treats phases higher in the list as earlier in time.

Every model element carries two phase properties:

  • Phase Created is the phase in which the element was added. It defaults to the phase of the view you are working in.
  • Phase Demolished is the phase in which the element is removed. It defaults to None.

Every view also has a Phase property and a Phase Filter property. The view phase is the "point in time" you are looking at, and the filter decides what is shown and how it looks.

A tip from the BIMsmith blog: you usually do not need a separate "Demolition" phase. Demolition is something that happens during a phase, and phase filters are designed to show it.

Phase Status: New, Existing, Demolished, Temporary

Revit compares an element's Phase Created and Phase Demolished values with the view's phase and assigns one of four statuses:

  • New: created in the view's phase.
  • Existing: created in an earlier phase and still standing.
  • Demolished: created in an earlier phase and demolished in the view's phase.
  • Temporary: created and demolished within the view's phase, such as temporary works.

The same wall can therefore be New in one view, Existing in another and Demolished in a third, without you changing the wall at all. Only the view's phase changes.

The 4 Phase Statuses NEW Created in the view's phase EXISTING Created earlier, still standing DEMOLISHED Created earlier, removed in the view's phase TEMPORARY Created and demolished in the same phase

Phase Filters: Controlling What Each View Shows

A phase filter is a rule that tells a view how to display each of the four statuses. For every status you choose one of three options:

  • By Category: elements look as defined in Object Styles and the view's visibility settings.
  • Overridden: elements use the settings on the Graphic Overrides tab of the Phasing dialog, such as halftone, a dashed line pattern or a phase material.
  • Not Displayed: elements are hidden.

Revit ships with ready-made filters such as Show All, Show Complete, Show Previous + Demo, Show Previous + New and Show Demo + New. A typical renovation set uses a plan in the Existing phase for the survey, a plan in New Construction with Show Previous + Demo for the demolition drawing, and another with Show Previous + New for the proposed layout. Show Complete gives the finished building.

To create your own filter:

  1. Go to Manage tab, Phasing panel, Phases.
  2. Open the Phase Filters tab and click New.
  3. Click in the Filter Name box and give it a clear name.
  4. For the New, Existing, Demolished and Temporary columns, pick By Category, Overridden or Not Displayed.
  5. Switch to the Graphic Overrides tab to fine-tune how overridden statuses look, then click OK.
  6. Select a view and set its Phase Filter property in the Properties palette.
A Typical Renovation Set Existing Plan Phase: Existing Filter: Show All Demolition Plan Phase: New Constr. Show Previous + Demo Proposed Plan Phase: New Constr. Show Previous + New

Demolishing Elements, Rooms and Other Gotchas

To demolish something, use the Demolish tool (the hammer icon on the Modify tab) and click the elements. Revit sets their Phase Demolished to the view's phase. Autodesk's help notes that demolishing an element in one view marks it as demolished "in all views that have the same phase." If the current filter hides demolished elements, they simply disappear as you click them, which surprises many users.

A few more rules worth remembering:

  • Rooms are phase-specific. A room belongs to the phase of the view where it was placed and is bounded only by elements that exist in that phase. Create duplicate plan views, each set to its own phase, rather than switching the phase of one view back and forth.
  • Infill. When a door or window in an existing wall is demolished, Revit can fill the opening, and you can adjust the infill wall's structure.
  • Schedules respect phases. Phase filters can be applied to schedules too, so check the schedule's phase if quantities look wrong.
  • Filters and properties work together. Phase Created and Phase Demolished can be used in view filters for extra control. If you automate checks, our list of top Dynamo nodes is a useful starting point.
  • Set it up in your template. Pre-made plan views with the right phase and filter save time on every renovation job.

Conclusion

Revit phasing rests on three ideas: elements know when they were created and demolished, views look at one moment in time, and phase filters decide how each status is drawn. Keep the phase list simple, rely on filters instead of an extra demolition phase, give each drawing its own view with the right phase, and you will get clean existing, demolition and proposed plans from a single model.

Sources

Post a Comment

Facebook